Looking for:

Windows 10 command prompt repair boot free download

Click here to Download

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

When encounter startup problems, we usually deal with them with the Startup Repair option. There is one way to open Command Prompt without entering the Windows desktop.

Here are steps to do that when the computer fails to boot. Step 1: Reboot your computer. When the computer shows the Windows icon, press F8 constantly to show the “Windows Setup”. Choose Repair computer on the next page. Step 4: Choose an account and type the password on the next page. Then click on the Continue button. The command line we’ll execute first is the system file check SFC. SFC can automatically scan for corrupted and missing system files, and repair or replace them in Windows Open Command Prompt from Windows recovery mode guided by the steps above.

The whole scan process may cost a few minutes or even hours. When the check is complete, you can try to reboot the computer to see if there are any problems with the startup. CHKDSK is a utility that can be used to check a specific drive and fix most issues with the hard drive. Problems in a master boot record, a boot sector, and a boot configuration data store can be fixed by this tool.

To run Bootrec. Then type the following command lines and hit Enter respectively:. Want to know the specific function of each command line? You can see the description of the function by typing bootrec and press Enter key.

Please note that even if the Bootrec. If you have already created a restore point before, you can restore Windows 10 to the previous state. Please note that System Restore wouldn’t affect personal files in Windows.

But all the apps, updates, and drivers installed after the restore point will be removed. Then type rstrui. The command would open System Restore wizard immediately.

Follow the instructions to choose a restore point for restarting your computer. For Windows. Data Recovery. Way 1. Repair system files using SFC command Way 2. Run Bootrec. Way 2. If you check and find nothing wrong with your hard drive, move to the next method. Way 3. Way 4. Access the System Restore with Command Prompt If you have already created a restore point before, you can restore Windows 10 to the previous state.

 
 

[How to Run Windows 10 Startup Repair Using Command Prompt

 

Normally you will receive one of messages below after the Windows 10 SFC scan process is finished. As for how to check the details of SFC scan process, and how to manually replace the detected corrupted system file with a good copy of the file, you can check Microsoft System File Checker Tool User Guide.

SFC is a lightweight Windows 10 repair tool. There is a chance that it may not be able to fix some corrupt files. In this case, you can further use Windows dism command line utility to which contains many more command lines to repair the Windows 10 install. You can use DISM command to install, uninstall, configure, and update Windows features, packages, drivers, settings, etc. Click to Tweet. The Reset this PC feature will reinstall Windows 10, but it lets you choose to keep your personal files or remove them before reinstalling Windows.

Step 1. Step 2. Next click Get started button under Reset this PC. Step 3. Choose one preferred PC reset option. In the image information window, choose Restore this system backup and Restore system to other location. Then, click Next and select the new hard drive in the next window. You can choose one based on your preference. It is also suggested to keep backup software AOMEI Backupper installed on your computer to provide continuous protection.

If you want to protect unlimited computers within your company or deploy images to multiple computers effortlessly, you can pick AOMEI Backupper Technician or TechPlus edition. You will be surprised to find that it enables you to copy the installation directory for portable version creation and then use it on any computer. Don’t hesitate to try it out! In this case, try the following methods: 1: Enable safe mode with command prompt. Method 1. Method 2. However, prevention is better than cure.

It is better to take preventive measures in advance than to solve the problem. Therefore, it is highly recommended to protect the Windows 10 with specialized software. Once disaster occurs, like system crash or disk error, you may return to normal status in a short time.

It also supports to restore Windows 10 to dissimilar hardware , i. Before restoring system, you can use the Check Image feature to check if system image backup is intact and without error. Note: If you run this command under Windows PE environment, the drive letters might change. Except for the command line interface, you still can use its graphic user interface and the steps are easier.

It requires a backup image and be sure it’s intact too. Note that if you cannot access your computer, you still need to create a bootable USB 16GB at least on a working computer.

Then press the F11 key shortly. Next, repeat this operation times until seeing the Recovery mode screen. However, it will taker a few minutes to repair it. Just wait for it completes. Any more feedback? The more you tell us the more we can help. Can you help us improve? Resolved my issue. Clear instructions. Easy to follow. No jargon. Pictures helped.

 

bootrec – Guide for Windows XP, Vista, 7, 8, , 10 – How do I repair Windows 10 with command prompt?

 
Expand the hard drive device to display all hard drives.

 
 

Top 10 Free MBR Repair Tools for Windows 10/8/7 to Fix MBR

 
 

Do you want a Windows 10 boot repair tool to repair your Windows? If your Windows PC cannot boot, refer to this article to get a powerful tool to repair it. My computer cannot boot suddenly! I used it yesterday, and it works well. But today, I start my computer and find Windows cannot boot. What should I do to repair it?

Or is there a professional Windows 10 boot repair tool that can help? Any advice would be appreciated! If you encounter the problem that Windows 10 cannot boot, you may be puzzled about the reason of it. Usually, the possible reasons of Windows cannot boot can be summarized as follows:.

There is something wrong with the system disk maybe virus attack or bad sectors. At this time, you should use powerful anti-virus software to repair it. Or you might have to replace it with a new system disk.

In this case, check your BIOS boot order to make sure the system hard drive as the first boot device. With this Windows boot repair tool, you can create a bootable USB drive to access your Windows computer which cannot boot now, and then repair Windows 10 with the bootable USB drive.

Other Notable Features: 1. User-friendly interface and easy to follow for computer experts and newbie; 2. Copy a specific partition to another partition or hard drive; 5. Therefore, it is a really reliable partition manager for Windows PC users. Before proceeding, connect a blank USB drive to a working Windows 10 computer because your Windows 10 cannot boot and needs to be repaired. Step 1. Free download the Windows 10 boot repair tool on the normal Windows 10 PC, install and launch it as well.

Step 2. Step 3. When it is done, you need to connect the bootable USB drive into the Windows 10 computer with boot issues. Enter BIOS settings to change boot order to make boot computer from it. Then you can do as below to repair Windows 10 with bootable USB. Please choose proper MBR type according to your operating system. It cannot solve the problem that Windows cannot boot due to the loss of bootable file or system file.

See, with this recommended Windows 10 boot repair tool, you can easily repair Windows 10 boot issues caused by corrupted MBR or bad sectors on boot partition. Usually, the possible reasons of Windows cannot boot can be summarized as follows: There is something wrong with the system disk maybe virus attack or bad sectors. Still Need Help? Have your problem been solved? If not, please input query in the search box below.