Looking for:

Windows 10 home homegroup not working free download

Click here to Download

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Here is short description how I get my network sharing work with Windows 10 v (I haven’t never use Homegroup so I start directly from step 2.) 1. replace.me › pc-transfer › homegroup-not-showing-up-windows
 
 

 

HomeGroup from start to finish.HomeGroup removed from Windows 10 (Version ) – Microsoft Support

 
Here is short description how I get my network sharing work with Windows 10 v (I haven’t never use Homegroup so I start directly from step 2.) 1. replace.me › pc-transfer › homegroup-not-showing-up-windows

 
 

HomeGroup removed from Windows 10 (Version )

 
 

I checked out several of the previous posts and none seemed to address my issue. Can’t upgrade the HP to , but that’s another story! Recorded it. Set up items to be shared. Tried to attach my HP to the Homegroup. At first was advised that no other PC was identified.

This later changed to “Windows detected another homegroup on your network. Asked for homegroup password. Entered the one from the Dell setup and clicked Next. After several minutes delay, got message “Windows no longer detects a homegroup on this network.

To create a new homegroup I hope someone can help me figure this out, because I’m tired of transferring files via USB drive! Now, in order for the HomeGroup networking feature to be working, there are certain Windows services that need to be enabled and running.

If you used a program to disable services or manually disabled them, it may be causing the problem. Step 1 : Type network in the search box and choose Network and Sharing Center in the list to open it. Step 3 : Choose Turn on network discovery or Turn off network discovery in the settings, and tap Save changes.

Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn’t disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you’re done. If you’re connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.

HomeGroup from start to finish. Write to us with the updated status and the required information related to HomeGroup in Windows 10, for us to be able to assist you further.

Was this reply helpful? Yes No. Sorry this didn’t help. Thanks for your feedback. I’m trying to take this step-by-step. I checked on the required services. All are running on Dell. Does it make any difference what is shown as the start method? These methods are shown for one or more of the listed services:. Under your Method 1, Step 3 it says Turn on network discovery or Turn off network discovery. I’m confused! Which one should be selected? Mine is now ON.

Please help me with these items on my Dell before I move on to additional steps or to the HP computer. I have the same problem with Homegroup not being discovered. Made sure all the settings were correct as described by Sayan. I’ve done all this already. Homegroup worked for a while, then stopped. None of the links or comments here addresses the question. I don’t need to install it, and I shouldn’t need to re-install it.

I want the one I already installed to function. Why is MS so dreadful, so relentlessly terrible, at actually admitting and addressing problems? I know, no one will answer that question. I looked into all 8 of the services you listed some were set to “Manual” setting others were set to auto but what exactly should the settings for these services be?

Also all or most of the Services have have Dependencies that also should be looked at and what are those dependencies? As many others have already stated the issues should never have been allowed to happened, this shows yet another laps in quality control and a perceived since of “I don’t care” towards all your users.

Please tell us that MS will not send yet another Update without first checking that all features, tools and access’s are properly in place and working, this may slow you down a bit but you’ll have a higher satisfaction among the masses. Perhaps because you’re not contacting Microsoft here. Just people who use Microsoft the same as you. And who may have the experience that will solve your problem. Choose where you want to search below Search Search the Community.

Search the community and support articles Windows Windows 10 Search Community member. Donald Eager. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse. Details required :. Cancel Submit. Previous Next. Hello Donald, We regret the inconvenience. Let me assist you.

Follow the below suggested methods and check if it helps to resolve the issue. Method 1 I suggest you to check whether the network discovery is turned to on all the devices.

Follow the below steps. Step 2 : Select Change advanced sharing settings to move on. Method 2 There might be chances where firewall blocking the access and visibility of the PC.

Try with the below mentioned command and see if it makes any difference. Reboot your PC and see if the problem still appears. Also refer to the below link and check if it helps. HomeGroup from start to finish Note: Applies to windows 10 as well. Thank you. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. In reply to A. User’s post on August 17, These methods are shown for one or more of the listed services: Automatic trigger start 1 Manual 5 Automatic 1 Manual trigger start 1.

If any of these need to be changed, I probably should start with them. Thanks for your patience! Still no further on, so I have given up as these bugs soak up hours of peoples time. Perhaps MS can get a bug fix in the next file upgrades??

In reply to GrahamHermon’s post on December 15, All of these bits of advice are irrelevant to the actual problem. It took me hours to learn – NOT from Microsoft but from others on the net – that there is no way to file share with Windows 10 except this. MS diagnostics aren’t worth the dynamite it’d take to blow them to where they belong, and their help pages aren’t any better.

So you’re suggesting my firewall all of a sudden on its own changed its settings? Homegroups was working. Now it is not. Nothing has been changed except MS’s constant uninvited updates. So if there’s a problem, MS caused it. In reply to CapnCack’s post on April 23, Joel in Vic. The HomeGroup Listener Service is completely missing from my list. Are these two things related? And how can I go about fixing this?

In reply to Snoz’s post on October 1, Agreed Thank you for trying to help out with this issue.